Thursday, 29 June 2006

EDANA Symposium – Vienna – 7/8 th June 2006

Introduction
Some 250 delegates from the nonwovens and related industries gathered in Vienna to attend EDANA's 2006 International Symposium on 7th – 8th June.

The Symposium, one of seven EDANA events in 2006, featured an interesting mix of high-level and diverse presentations covering nonwovens business, market and technology trends and innovations.

The various papers demonstrated many of the key strengths of the nonwovens industry – a focus on innovation, successful partnerships within its supply chain and the exploration of new opportunities, whether in new geographical markets, new product developments, or the application of advanced hybrid technologies.

The uplifting cocktail party, arranged with EDANA's now trademark style in the foyer of the Vienna Fine Arts Museum , included a guided tour of some of the major works in this beautiful building.

Keynote - Emerging Markets

Nenad Pacek, Director of the Economist Intelligence Unit's Central and Eastern Europe, Middle East and Africa (CEEMEA) Division observed that CEEMEA, with 7.7% of global GDP was now bigger than China (4.2%) and India (1.5%) combined, and while small compared with the USA and Western Europe (29% each) was clearly the region most worthy of corporate investment attention. Furthermore it was more predictable (politically) than many other emerging markets.

Within CEEMEA, Russia was the top priority for expansion with sales growth higher than China . Its economic fundamentals were stronger than ever and looking sustainable. It should prove the fastest-growing market in the world for the average multinational corporation: 94% of companies in Russia were already showing double-digit growth. After Russia , Turkey was the second most important market for international companies, 40% of them showing double-digit growth. Capital investment here was rising at 28% per year and while Turkey is exposed to more currency volatility and temporary setbacks than Russia , the risks are diminishing. After Turkey , the Middle East and North Africa was the third most important region. Here, regional oil revenues were running at 5 times the 1998 level and with oil expected to remain above $55/barrel the best growth will be in Saudi, Algeria , Qatar , UAE, Libya and the Sudan . The risks are obvious: high oil price reduces incentives for structural reform and if the oil boom ends the economies in this area are likely to collapse as they did at the end of the 1970's. US Companies in particular are nervous about investing in the region.

Within Central Europe , Mr Pacek saw sales growth accelerating in the Czech Republic , Slovakia , Poland and Slovenia , but slowing in Serbia , Croatia , Romania and Bulgaria . The Baltic States and Albania were stable at very good levels, and a devaluation of the forint was expected in Hungary .

He felt the continuing obsession with China coupled with the multiple corporate mistakes made in emerging markets would lead to problems for the developed economies. The mistakes were as follows:

• Short-termism at board level.

• Lack of board level commitment to developing business in emerging markets.

• “We'll give you more resources when you prove there's more business” – Catch 22.

• Wrong corporate structures for the regions.

• Assumption of market leadership as of right.

• Lack of local presence – working mainly through distributors.

• Centralised decision making (no local office).

• Over-reacting to economic setbacks.

• Judging results by Western standards (Quarterly Profit Forecasting etc doesn't work).

• Aversion to risk taking. (Need to take risks and monitor them).

Asked where India fitted into the EIU's global picture, Mr Pacek said the Subcontinent is now central to their current strategy studies. Pakistan and Bangladesh are not a major priority other than as a possible source of low-cost labour-intensive manufacturing. Profitability of investments in China is improving, but there are still issues with intellectual property and counterfeiting. Domestic competition is now very fierce, but Western nonwoven machinery producers are thought still to be making good profits.

Cost Pressures


Barry Davies, Director of Fibers for CMAI Europe used the Chemical Markets Associates Inc cost model to investigate the impact of raw material price changes on the costs of the various nonwoven processes:

• In 2005 EU melt-spun PP was the cheapest product at ~$1300/ton. Melt spun PET was ~$1500/ton, and carded PET ~$2300/ton, the increase over melt-spun being labour, binder and high drying costs.

• Chinese melt-spun PP was cheaper mainly due to labour costs being about one third of the EU level. (Power costs were higher due to the need for more costly uninterruptible sources for spun-melt.) However the cheapest spunbond PP (~$1200/tonne) was found in the Middle East where the raw material, labour and power costs were all lower than the EU.

• For carded polyester, China was more expensive than the EU due to the high power costs, and once again the Middle East was significantly cheaper at ~$2000/ton.

• However China has 3 million tonnes of surplus polyester staple fiber capacity and its polymer production is only operating at 32% of capacity.

• Propylene is currently more costly than terephthalic acid or mono ethylene glycol so PP and PET polymers will cost about the same for the next 2-3 years.

• Coverstock, carpet backing, geotextiles and interlinings could switch from PP to PET to benefit from the current differential.

• In 2009 as new capacities come on stream, PP is expected to regain its advantage.

• As the PP price reduces again, the cost of the meltspun PP nonwovens in EU will fall to ~$1100/ton and the relative advantages of production in China or the Middle East will diminish.

• By analogy with the Chinese production of plastic bags (exports increased from 200,000 tonnes in 1996 tonnes to over 1 million tonnes by 2006) increasing amounts of Chinese PP spunbond will be exported.

Overall, the Middle East emerged as the most attractive region to site nonwovens production plants.

In response to the inevitable question about future oil price, Mr Davies guessed current prices would allow new sources to come on stream and were therefore unsustainable. $40-$50/barrel would be the level to plan for in future.

Polypropylene Future


Marc van der Elst, General Manager PP for Total Petrochemicals Research ( Belgium ) pointed out that proven conventional oil reserves at the end of 2004 amounted to 40 years supply at 2004 consumption levels. 67 years supply of gas remained on the same basis. Unfortunately the main reserves were in risky regions, OPEC having little spare capacity at current prices. With regard to propylene:

• Growth in demand will exceed that of gasoline and ethylene.

• There will be no new crackers in Western Europe or North America, and combined with propylene shortages in Asia , the supply will be tight through 2008.

• In 2009-10, major new “on-purpose” (as opposed to by-product) propylene production with come on stream in the Middle East to alleviate the situation.

• 5 major producers (Basell, Borealis, Ineos, Total and Sabic) make 82% of the world supply.

• World PP demand was 42.3 million tonnes in 2006 and demand growth is expected to remain at about 5% per year.

• About 29% of total polypropylene is converted into fiber.

• Polyethylene production is now moving to the Middle East .

Asked about the viability of bio-based plastics, Mr van der Elst thought they may prove to be an alternative to oil-based products if oil stayed above about $60/barrel. However he thought using corn as a feedstock may not be sustainable if good quality water becomes any scarcer.

Asia Pacific Outlook


Rory Holmes, President of Inda (USA) provided an update of world nonwovens market data and estimates from Inda's 2004 report on nonwovens in the Asia-Pacific region:

• Annual Global Growth will continue at 7.3% allowing nonwoven output to reach ~7million tonnes/year in 2010 c.f 4.8 million tonnes in 2005. Square metreage will grow at 8.3% reflecting the general move to lighter fabrics in hygiene.

• By 2010, Asia Pacific will have the largest share of production (>2.1 million tonnes, followed by EU (~1.8 million tonnes) and USA (~1.5 million tonnes). China alone will account for ~1.2 million tonnes of the AP figure.

• Between 1994 and 2004, Asia Pacific tonnage rose at ~8.5% per year to 1.4 million tonnes and is expected to reach 2.1 million tonnes by 2009.

• China 's nonwoven output was 650,000 tonnes in 2004, double that of Japan , and is expected to reach 1.1 million tonnes by 2009. By then Japan (350,000 tonnes), Taiwan and Korea (180,000 tonnes each) and other Asia-Pacific countries (300,000 tonnes) would be small in comparison.

• Carded nonwovens excluding fibrefill and stitchbond accounted for 59% of the nonwovens produced in the region in 2004, but this share will decrease to 49% by 2009

• Spunmelt nonwovens had a 36% share and had grown fastest (15%/year) to reach 500,000 tonnes in 2004. 12%/year growth was predicted through 2009. By then 82% of all spunmelt would be PP-based.

• Needlepunching is the main bonding system (404,000 tonnes in 2004) and will rise to 540,000 tonnes in 2009. China alone will make 245,000 tonnes of needlefelt in 2009.

• Hydroentanglement had been the fastest growing bonding system (28%/year to reach 98,000 tonnes in 2004). Ongoing growth at 18% year is expected to enable spunlace to reach 128,000 tonnes by 2009.

• Thermal and chemical bonding is declining and will fall further (from 314,000 tonnes in 2004) to be overtaken by spunlace ~2010.

• Air-laid production (39,000 tonnes in 2004) is expected to triple by 2009, mainly due to wipes, femcare and incontinence growth.

• PP staple is expected to reach 432,000 tonnes in 2009, but polyester staple will grow faster to reach 307,000 tonnes.

• Rayon usage in nonwovens is growing also, reaching 94,000 tonnes in 2004 and 118,000 tonnes by 2009.

New Absorbent Rayons


Josef Schmidtbauer, Director of Innovation for Nonwovens at Lenzing AG ( Austria ) reviewed the absorbency of rayon fibres using tests appropriate to the evaluation of hygienic disposables, with special emphasis on demonstrating the superiority of cellulosics over synthetics. Several fibers now under development were mentioned in passing. Conclusions were as follows:

• The absorbency of fibrous masses depends on the absorbtion of fluid into the fiber (Water Retention Value or WRV) and the ability of the mass to retain fluid in the spaces between fibres (Water holding capacity or WHC)

• WRV – centrifuge method – depends on the fibres molecular structure and the presence of any voids in the structure. Numerically, WRV is predicted by the reciprocal of the product of cellulosic fiber crystallinity and the square of its molecular orientation. 90% is a typical WRV for viscose, 60% is typical for lyocell while the synthetics tend to be less than 5%.

• Viscose has small voids in the core while lyocell has a more uniform dispersion of much smaller voids.

• Water holding capacity (WHC, otherwise known as Total Free Absorbency) depends on the structure of the fibrous mass and is typically measured on carded webs by methods standardised in the Pharmacopoeias. Values of 21 g/g for viscose and lyocell and 27 g/gm for cotton were presented.

• WRV can be increased by mixing other absorbent polymers into the spinning dope:

• Alginate Alloy (“Hydrofil A” fiber – 140% WRV)

• Guar Alloy (“Hydrofil G” – 120% WRV)

• Carboxymethyl cellulose Alloy (“Viscosorb” – 125% WRV)

• Superabsorbent Alloy (“Lyocell/SAP” – 155% WRV)

• WHC was hardly affected by these additions but the use of cellulose carbamate (“Hydrofil C” fiber) increased WHC to 32% while leaving the WRV the same. Here the carbamate regenerates to cellulose in spinning but the resulting fiber is very highly crimped – this being the structural feature which, after carding, increases WHC.

• “Visconova” (WHC = 26.5%) is another improved absorbency fiber where the viscose process is adjusted to maximise fiber crimp.

• Modifying the cross-sectional shape of rayon is another way of substantially altering absorbency but the changes to WRV and WHC are minor for the trilobal or flat section products currently on offer. Here the benefits appear in the Syngina test which mimics the absorbency of a tampon, giving values of 12 g/plug for cotton and 15 g/plug for viscose. In this test all the development fibers mentioned above give improved results, the most notable being:

• “Hydrofil A” (Alginate alloy) and “Viscosorb” (CMC alloy) both give 20 g/plug.

• “Lyocell/SAP” alloy gives 17 g/plug.

• The all-cellulose trilobal “Viscostar” and the more triangular shaped “Delta” fibers give 17.5 and 18 g/plug respectively.

• For wiping products the Demand Absorbency test is used to assess water uptake. In this test 50gsm viscose spunlaced nonwoven typically gives ~7 g/g water uptake compared with less than 2 g/g for synthetics. “Lyocell/SAP” gave 8 g/g.

• Demand Absorbency had also been used to evaluate blends of viscose and “Viscostar” (trilobal viscose) in 100gsm needlefelts. Moving from 100% viscose to 100% “Viscostar” increase the DA from 13.5% to 18%, with a value of 17.5% being possible for a 50/50 blend.

Asked how WRV and WHC were related, Mr Schmidtbauer explained that they were independent variables. How would the “Lyocell/SAP” fiber be dried after hydroentanglement? With difficulty: the fiber had yet to be commercialised.

EU Industrial Wipes Market


Sylvain d'Incau of DuPont ( Switzerland ) observed that the slow down in the hygiene market was leading consumer wipes producers to turn their attention to the industrial market, dumping fabrics designed for consumer use at very low prices. He was at pains to point out that the industrial wipes market was less attractive than might be imagined:

• Industrial wipes is a highly fragmented market with millions of end-users served by thousands of distributors.

• Industrial wipes are no more profitable than consumer wipes.

• The market size is difficult to measure but is probably between €1 and €3 billion at end-user level.

• Only 20% of this is nonwoven, so the nonwoven wipes market would be between €200 and €600 million or 20,000 - 50,000 tonnes.

• 70% of the nonwoven wipes come from very large backwards-integrated producers so the opportunity for roll-good suppliers is limited.

• In fact Dupont estimate the opportunity for roll-goods to be between 6000 and 15000 tpy, or about the output of one modern spunlace line.

• Average annual growth is between 4 and 5% per year, but the contamination control segment (~1000 tonnes/year) shows 8-10% while the basic wipes show 1-2% per year growth.

For future opportunities the nonwovens industry must challenge the dominance of textile rental towels by highlighting their hidden costs and the risk of contamination due to imperfect laundering. Industrial wet-wipes are taking off, growing 4-5 times faster than dry wipes, and now account for about 5-10% of the total nonwoven volume in industrials. Microfiber spunlaced nonwovens should grow at the expense of the costly woven and knitted microfiber wipes.

Asked what the biggest threat was, Mr d'Incau cited increasing raw material costs which are impacting the viability of the whole nonwovens industry. He also thought the industrial nonwovens industry was a threat to itself as the competitive dynamics were causing downward pressure on prices.

Opportunities for Biodegradable Nonwovens


Frederic Noelle, R&D Director of Rieter Perfojet SA (France) said the combination of biodegradable fibres from sustainable polymers at competitive cost with efficient hydroentanglement bonding allowed the production of hygienic nonwovens better suited to emerging European waste management strategy. Viscose and lyocell were now comparable in price to PP and PET, and HE nonwovens made from them were cheaper than the equivalent synthetic nonwovens. These nonwovens were easily and rapidly biodegraded, both aerobically (landfill or compost) and anaerobically (sewage treatment or landfill). If stronger products were required, polylactic acid (PLA) was now the most competitive of the synthetic biodegradables, the polymer price having declined to meet the rising cost of polyester resins. PLA could be spunlaid and hydroentangled and the more durable fabrics, whilst not truly biodegradable, could be hydrolysed and degraded in active composting where temperatures above 65 o C and humidities above 90% would destroy it in 60 days.

Wingformer Update


Alessandro Celli, Managing Director of Celli Nonwovens S.p.A ( Italy ) provided more information on the design of the new Wingformer air-lay head. Compared with the established systems from Neumag (M&J) and Danweb the most significant difference appeared to be

• The distribution of the pulp through a thin flexible screen rather like a paper machine forming wire, which travelled above and with the main conveyor and could be cleaned of any nits or undispersed pulp on the return run above the “headbox”. This guaranteed blockage-free running and presumably improved MD/CD ratios.

• The use of wing-like fiber distribution elements said to give uniquely uniform webs with very good MD/CD property ratios. These were attached to numerous independently driven rollers which spin in contact with the moving distribution screen and wipe the fibers through it.

The 50cm wide pilot former now installed at Rieter Perfojet allows air-laying onto a spunlaced web prior to further spunlacing and drying. Throughput exceeding those of the competitive systems is claimed, and the current maximum (650 kg/m/hr with treated pulp) is limited by hammermill throughput. Web profiles show weight variability below 2%, and most remarkably, this uniformity is maintained over air humidities ranging from 80% down to 30%. If confirmed on a production scale, this would allow the elimination of air conditioning with substantial savings in energy – estimated at €350,000 per year for a 3.6m wide machine.

Would the Wingformer work with synthetic fibers? Yes, but a new fiber opening system is needed to prove how well it could work. At present 6mm fibers have been processed, but the screen system can be made more open for longer fibers. The web onto which the pulp is laid must be very open in order to get the necessary air-flow.

Spunlaced spunlaid


Dr Ullrich Münstermann of Fleissner GmbH ( Germany ) put the maximum capacity of their Aquajet HE lines at 4.5 tonnes/hour for plain products and 3.2 tonnes/hour for structured products. Total annual production of HE fabrics was now running at 430,000 tonnes per year, but the combination of spunlaying with HE was expected to provide future growth. In particular, the SPS (Spunbond Pulp Spunbond) system could in future provide nonwovens of high quality, low cost and high profit for the wipes market. 48 gsm of woodpulp could be sandwiched between two 8 gsm layers of PP spunbond to give a highly absorbent fabric with good uniformity, strength, and a softness similar to an all-staple wipe. This had been made at speeds of 500 m/min in the Fleissner R&D centre, but offline processes would be possible. In this process coverstock spunbonds could be fed from an unwind stand to replace the card webs in an air-lace product.

Spunlaced-spunlaid could also replace needled and/or chemically bonded spunlaid products in geotextiles and roofing applications. Spunlacing would allow higher production speeds, higher strengths and savings of fiber and binder. It would also allow sea/island filaments to be split into microfibers. The novel characteristics of these new fabrics could also be expected to open up new durable markets.

Automotive Nonwovens


Tolga Görgün of Advansa GmbH reviewed the use of nonwovens in automotive construction and made the case for increased use of polyester. Averaged over all types and sizes of cars, about 30 kgs of textiles are used per car. Of this 20 kgs are nonwovens, and with 64 million cars being produced every year the market for nonwovens is about 1.3 million tonnes. The average annual growth rate is 5.8%. Approximately 55% of the fiber used is polyester, and the case for using more rests on its excellent economy (especially in China ), abrasion resistance, light fastness, thermoformability and anti-stain properties. 66% of the nonwovens used in cars are spunbonds, 27% needlepunched, and 6% spunlaced. 43% of the nonwovens are used in carpet-related applications, 23% in hood and trunk liners 17% in insulation and 6% in headliners. Asked how the consumer would benefit from increased use of polyester Mr Görgün said lower costs would be the main thing.

Fuel-Cell Nonwovens


In tomorrow's hydrogen economy, static solar-panel power stations will electrolyse water into hydrogen and oxygen, and these gases will be packaged and stored under pressure to be recombined in a stack of fuel cells to re-generate electricity at a high enough wattage to power a car or a home. Klaus-Dietmar Wagner of Freudenberg GmbH said 11,000 fuel cells were built in 2004, up from 1000 in 2000. Many of these still run on natural gas but as the fossil fuel runs out, fuel cells will become a major power source in the “hydrogen economy”; today's hybrid cars being seen as just a bridge to the use of fuel cells.

The most promising cells are the Polymer Electrolyte Membrane (PEM) varieties which rely on membranes to transport protons, insulate anode from cathode and separate the gases between anode and cathode.

• The PEM's, which pass protons from the anode to the cathode, are fluorocarbon polymers with sulphonic acid side groups e.g. Nafion® (DuPont) or Flemion® (Asahi Glass KK). The thinner the membrane the better, so nonwovens are used to reinforce them.

• Gas Diffusion Membranes either side of the PEM are wet- or dry-laid carbon fiber products coated with fluorocarbons and designed to transport the hydrogen and oxygen to the electrodes, conduct the protons to the PEM and on to the cathode, and to channel the water away from the cathode as it forms.

• Filter membranes tend to be paper based, but nonwovens could be better.

Asked about binders, Dr Wagner said they could be used but had to be very pure. Hydrogen was of course explosive, but modern handling techniques avoided the hazard.

Nonwovens in Construction


David Avril of Don and Low (UK) described their development of breathable nonwovens for non-ventilated pitched roofs. Conventional roofing “felt” is impervious bitumen coated scrim or paper which is totally water and vapour proof. Roofs using it, around 80% of UK homes, have to be ventilated to prevent condensation and this ventilated area is the typical cold loft space. If the roofing felt could be both waterproof and vapour permeable, the loft space could be insulated at roof-level rather than floor-level and become another usable warm area.

The solution is to use an SMS or SFS nonwoven (where F is a microporous film) to achieve a moisture vapour transmission rate of at least 870 g/sq.metre/day. Additional requirements are:

• High water hold-out to cope with wind-driven rain, especially in the short time before the tile cladding is added.

• Adequate strength.

• Low noise in windy conditions.

• Resistant to “tenting” (i.e. permeability to liquid water when touched on the dry side).

• Stable properties for the lifetime of the building.

The new fabric – similar to the US housewrap nonwovens - will allow homes to be built with non-ventilated roofs and will reduce heat loss from the roof structure from 25% down to 4%. These big energy savings are the driving force for the development, and use of the fabrics is expected to take-off as architects begin to specify the new construction method.

Nonwovens in Apparel?


Steve Russell, Director of the Nonwovens Research Group at Leeds University (UK) reviewed the numerous attempts to break into the apparel market since the first paper dress craze captured the headlines in a sixties summer. He thought the trend to “Fast Fashion” increased the chances of nonwovens finding application in novel apparel items. Fashion clothing was increasingly short-life so durability and washability requirements were easing in this sector. Key properties were isotropy, formability and fit, generally achieved in textiles through the ability of woven or knitted fabrics to shear. Nonwovens, especially hydroentangled spunbonds made from elastic polymers, were looking increasingly capable of providing the comfort and wearability needs for fashion clothing, so the NRG is investigating how these fabrics can be finished and made-up into garments using novel techniques which better exploit the inherent properties of nonwovens. Part of the justification for the work arises from the decline in EU textiles as China moves ahead to produce over half the world's clothing in 2007.

Eastern European Hygiene


Krystyna Boryk-Jozefowicz, Vice Director of the Foreign Trade Dept. of Poland's TZMO SA replaced Yana Danailova of Ficosota Syntez Ltd at short notice and returned to her April 2005 Geneva theme arguing that Eastern Europe was just a state of mind. 15 years ago, being part of a centrally planned economy, the market did not exist. Now it was mature and there was no need for any further investment or interest from multinational Western companies. Globalisation and Communization were very similar, both leading to uniformity and limited choice for the consumer. She remained concerned that European Integration was leaving out Russia , Ukraine , Kazakhstan and Belarus , and continued to predict that these countries would form a new economic block of 205 million people because they would not accept “EU waiting list” status.

Saturday, 29 April 2006

Notes from the EDANA Nonwoven Research Academy Roubaix 20-21/4/2006


Key Points

• Diffuse Coplanar Surface Barrier Discharge Plasma treatment allows faster, safer and cheaper activation of PP spunbonds. Permanent hydrophilicity is claimed from a 0.27 KWh/kg application on a 17gsm fabric. The treatment also allowed chitosan to be grafted onto the surface of the PP.
• Dissolving cellulose in ionic liquids allows the production of lyocell-like fibers, but the solvents tried so far are unlikely to yield cheaper fibers.
• Pore size distribution can be measured, albeit laboriously, with a scanning light microscope.
• Hydroentangled fabrics exhibit 2-3 times the dye uptake of equivalent woven or knitted products.
• The atomic force microscope has been adapted to measure the surface friction of PP fibers and hence the effects of spin finishes.


The first EDANA Nonwoven Research Academy was the conference component of last year's INDEX in Geneva . This second NRA was the first “stand-alone” meeting, the first to encourage student participation with a special registration fee of €25, and the first to feature EDANA grants to cover fees, travel and accommodation expenses for 11 selected MSc and PhD students of nonwovens.

Held in the lecture theatre of the Ecole Nationale Su p é rieure des Arts & Industries Textiles (ENSAIT) in Roubaix , France and with the majority of papers being given by Research Institutes, this conference was as academic as the organisers intended. From the delegate list, of the 135 people present, 36 had registered as students (21 from ENSAIT). With a few exceptions, companies (59 attendees) were represented by their R&D personnel, and the remainder were from the Research Institutes and Universities. As well as a full day of lectures, the programme included optional visits to the ENSAIT GEMTEX (Engineering and Textile Materials) laboratory, IFTH (Institute Francais Textile-Habillement) and CENT (Centre Européen des Nontissés). Summaries of the papers presented follow.

Novel approach to fibre recycling


Dr Andreas Bartl , Assistant Professor – Vienna University of Technology, Institute of Chemical Engineering (Austria) reviewed fiber production in 2004 and observed that cotton (26 million tonnes), depending where grown, required between 70 and 500 billion tonnes of water, between 6 and 19 million tonnes of oil, between 150,000 and 250,000 tonnes of pesticides and between 3.4 to 5.3 million tonnes of fertilizers for its supposedly eco-friendly production. Thermal energy recovery from its incineration was only 17 Mj/kg, less than that of the oil needed in its direct production and far less than the total oil requirement once that used to produce the pesticides and fertilizers was included. Recycling of such fiber was therefore urgently recommended. Sources of fibrous waste ranged from predictable fiber and textile production waste to the unpredictable output of carpet and tyre shredders via apparel waste with its unwanted contamination of buttons and zips.

In addition to ecological worries about cotton, legislation, e.g the vehicle end-of-life regulations and the need for economy drove the need for increased levels of fiber recycling so Dr Bartl and his colleagues had hit on the idea of using short fibers from shredders as viscosity modifiers. To test the idea they had started with well characterized 0.3 to 2 mm viscose fibers, typically 1.7dtex, guillotine cut by Casati ( Italy ). Sieving trials showed that sieving was incapable of separating the fibers into well defined lengths and diameters, but an optical image analyzer (Morfi – which works on suspensions of fibers in water) could separate a mixture into the component lengths. Next they took lyocell fiber ground up in an Alpine cutting mill, and fiber reclaimed from tyres, both ground and as-received, characterized them on the Morfi analyzer and investigated their influence on the viscosity of glycerol in 1% w/w suspensions. All trials showed increased viscosity and the ground fibers changed the flow behaviour from Newtonian to thixotropic. The unground tyre-derived fibers caused pseudoplastic flow.

Real applications for fibers obtained by grinding waste needled and spunlaced nonwovens are expected in reinforcing bitumen as used in asphalt, roofing and sealants and these are now being investigated. Lacquers, cements and adhesives could be other outlets for recycling such fibers.

A skeptical questioner wondered whether or not the project had industrial support – maybe from the paint industry. It didn't. Maybe the method would work for bituminous paints using tyre-derived fibers,

Ionic liquids for man-made cellulose fibres


Dr Thomas Röder , Project Manager – Lenzing AG, Pulp Research ( Austria ) surveyed the literature on ionic liquids for cellulose dissolution. Ionic liquids are salts that melt below 100C, the most valuable being those that are liquid at room temperature (RTIL's). RTIL's generally comprise a bulky and asymmetric organic cation e.g. 1-alkyl 3-methylimidazolium with anions ranging from simple halides to large organics, the larger ones tending to give lower melting points.

To replace NMMO in lyocell production the required solvent should:

• Melt below 20C and boil above 200C.
• Dissolve 15%+ of cellulose without excessive degradation.
• Allow cellulose to be reprecipitated in water.
• Be easy to recycle at high efficiencies.
• Be non-toxic and odourless.
• Yield cheaper fibers than lyocell.
• Yield better fibers than lyocell

The chlorides tend to be good cellulose solvents, 1-butyl-3-methylimidazolium chloride (BMIM-Cl) yielding a spinnable 10% solution at 100C and a 25% solution given pulses of microwave energy. Unfortunately the latter was extensively degraded and non-fiber-forming.

The WO 2006/0000197 A1 patent from TITK suggested the use of BMIM-Cl in a 10-45% solution in water to dissolve wet pulp (50% cellulose) to give a 16.5% cellulose (DP=530) solution when stabilized with sodium hydroxide and propyl gallate. This could be air-gap spun at ~50 m/min through ~100micron holes at ~110C into water. Fibers were stronger than lyocell with similar elongations, but the proposed solvent recovery system looked expensive.

Lenzing's work with the same solvent and with 1-allyl-3-methylimidazolium chloride (AMIM-Cl) has used dry pulps and achieved similar fiber properties albeit from lower concentrations of cellulose in solution (11%). AMIM-Cl gave a slightly lower modulus fiber from solutions of up to 12% cellulose. Key areas for further work are:

• Optimisation of spinning parameters
• Investigation of degradation and the development of better stabilizers
• Developing a commercially viable recovery system
• Investigation of other RTIL systems

In response to questions, Dr Röder did not think either of the two RTIL's worked on to date would yield a cheaper fiber than lyocell. The solvents are very expensive and corrosive, and residues in effluent would have an aquatic toxicity equivalent to many other problem solvents.

Fire retardancy using intumescence


Sophie Duquesne , Lecturer – Ecole Nationale Supérieure de Chimie de Lille ( France ) said intumescence arises when a carbon source (polyurethane) mixed with an acid (ammonium polyphosphate) and a blowing agent (melamine) is heated. The resultant foamed char provides a physical fire barrier. Intumescent mixtures can be applied by any of the usual coating systems, using masterbatches by extrusion, or in powder coating of bulky nonwovens.

A laboratory investigation of padding versus backcoating methods onto a PP nonwoven yielded the following observations:

• Padding allows fast development of the protective foam and delays fiber melting. However the fibers still ignite
• Back-coating is more effective but if the face is exposed the PP quickly melts and burns
• Extrusion of inherently flame retardant articles could be best but the technique now has to be confirmed on fibers.

Improved textile coating after nap-raising needling


Dr Barbara Schimanz , Project Leader – Saxon Textile Research Institute (STFI-Germany) has tried needling a stitchbonded nonwoven to create a hairy surface in order to increase the adhesion of any coating applied to that surface. Adhesion of the coating did improve by 15-20% but the needling operation almost halved the nonwoven's MD strength, presumably as a result of breaking the stitching yarns. CD strengths were however more than doubled. Less aggressive ways of improving adhesion were not discussed.

Penetration and spreading of liquids in layered nonwovens


Dr Ningtao Mao , Senior Research Fellow – Nonwovens Research Group, Centre for Technical Textiles, University of Leeds ( United Kingdom ) pointed out that while liquid absorbtion and penetration in homogeneous single layer materials is well understood, the performance of multilayer composites is complicated by the effects of the interface between layers. This interface region is now being studied theoretically and practically at Leeds University , but these first attempts at developing a mathematical model to predict composite absorbency behaviour have concluded that “work is required to elucidate the structure of this region”. Difficult questions about fluid flow against gravity in diaper cores and the absorbency of non-Newtonian fluids such as menses were probably meant as helpful indications of a possible future direction.

Structuring of spunlaced nonwovens


Dipl.-Chem Wolfgang Schilde , Department Manager – Saxon Textile Research Institute (STFI) ( Germany ) has been using their state-of-the-art pilot line with Fleissner Aquajet to investigate creating 3-D effects (dimples) in spunlace nonwovens. After basic experimentation to optimize the process, factors affecting the thickness of a 3-D structure were explored, line speed proving the most important for a given fibre. At 25 m/min well defined dimples were obtained. Measurements of heat insulation properties led to the suggestion that 3-D nonwovens made from FR fibers could be used in the insulation layer of fire-brigade clothing where the extra thickness would allow savings of 30-50% in weight of fiber used.

An expert system for needlepunched geotextiles


Dr Amit Rawal , Post-doctoral Researcher – CSIR, Materials Science and Manufacturing ( South Africa ) has measured the effects of feed-rate, stroke frequency and depth of needle penetration on the properties of needlepunched geotextiles.

• Increasing needle penetration increases MD fiber orientation
• Increasing stroke rate reduces MD fiber orientation
• Permeability of geotextiles is reduced by increases in both needle penetration and stroke frequency
• Lower feed rates increase the permeability

The “expert system” developed from the mathematical model allows the design of geotextiles with specific properties in a cost effective manner.

In response to questions, fiber orientation had been measured by recording the angles of surface fibers relative to MD. Maybe there should be a factor in the model for fiber properties, and maybe the model should now be verified experimentally.

Nonwoven pore size distribution from optical profiling


Dr Philippe Vroman , Associate Professor – Ecole Nationale Supérieure des Arts et Industries Textiles (ENSAIT) (France) has used white-light interferometry with a CCD microscope stepping at 1 micron intervals in the X and Y directions and with 1 nanometer resolution in the Z direction to build up multicoloured images of a nonwoven fabric. This non-contact technique is commonly used for characterizing surfaces in the metallurgical, optical and the paper industries. Here, vertical stepping allows the nonwoven to be characterized in several slices through the thickness, each slice being coloured differently. After acquiring the image it needs several stages of processing prior to pore size distribution measurement, “thresholding” – removing background fibers, and “binarisation” – to separate fibers from pores being most important. Pore sizes are then measured one by one from the final image and their distribution, mean, median and maximum sizes are calculated. Correlations between the measured values and hydraulic properties and filtration performance appear to be good. However the method only works well on thin materials, is very time consuming – around 2 days for a result on a few square millimeters - and is only suitable for use in a research environment. On the plus side, the same equipment can be used to measure thickness (non contact), fiber orientation, cloudiness, cover factors, roughness and the embossing ratio of a calendared product.

Could a flat-bed scanner be used to get faster results? Yes, but it would miss the 3-D information which allows the effects of the next layer of fibers to be accounted for. Can surface roughness be correlated with hand-feel? They are working on this. Could the method be made to work on-line? Yes, with different sensors, but a confidentiality agreement prevents information sharing here.

Nonwovens as potential vibration dampers


Dr Elaheh Ghassemieh , Lecturer – Mechanical Engineering Department, University of Sheffield (United Kingdom) has measured the vibration damping properties of nonwovens by bonding them to a magnetically-excited cantilever beam in the ASTM E-756-98 standard test. For fiber-glass nonwovens, damping ratio increased linearly with basis weight, the rate of increase increasing with the amplitude of the vibration. If the glass nonwovens were reinforced by stitchbonding, the damping ratios were further increased, but only if the reinforcement aligned with the beam direction. Aramid nonwovens proved less efficient dampers than glass, but had much greater increases in damping with amplitude. Had Dr Ghassemieh studied polyester nonwovens? Yes, but her applications were in aerospace where high modulus and resistance to corrosion were required.

Dyeing performance of hydroentangled fabrics


Andrew D. Hewitt , Postgraduate Researcher – Nonwovens Research Group, Centre for Technical Textiles, University of Leeds ( United Kingdom ) has shown that in standardized conventional textile dyeing operations, hydroentangled nonwovens exhibit 2-3 times the dye-uptake of knitted or woven textiles made of the same fibers at the same basis weight. This applies to cotton (direct dyes) and polyester and PLA (disperse dyes). Furthermore the HE fabrics exhibited increased depth of shade and higher wash-fastness. The effects were thought to be due to the lower density and even fiber distribution in the nonwoven compared with the highly densified yarn structures in the conventional textiles. However varying the bonding pressure in HE to make denser fabrics (70 bar up to 190 bar, which reduced the fabric thickness from 1.4 to 1.1 mm) had no effect on the dyeing performance. If dyeing conditions were altered for the HE fabrics to restrict dye-uptake to the levels obtained on wovens and knits, then savings in dye, energy and wastewater treatments would be obtained, and the environmental impact of the dyeing process could be reduced.

Questioners were concerned that the dyed HE fabric lightfastness would be inferior and doubted the ability of HE fabrics to survive commercial dyeing operations. Lightfastness remained to be measured. Dimensional stability of the HE fabrics had been good in laboratory dyeing.

Plasma surface modification


Kenth Johansson , Area Manager Surface Modification – YKI, Institute for Surface Chemistry (Sweden) said the disadvantages of conventional plasma treatment included the need for long treatment times, the costly Helium gas and the short life of the electrodes. A new method called Diffuse Coplanar Surface Barrier Discharge Plasma treatment overcame these problems by:

• By using 10x the usual power density (100 W/cm 3 ), speeds can be increased
• By alternating the positive and negative electodes and embedding them in a single ceramic plate (treatment from one-side only). This arrangement created a “waste-free” localized plasma field with high homogeneity.
• Using nitrogen or carbon dioxide gases along with the reactive gases instead of helium.

This process could activate the surface of a 17 gsm PP spunbond using only 0.15 KWh/kg and could create a permanently hydrophilic surface with 0.27 KWh/kg. The embedding of the electrodes in a ceramic plate yields a safe and robust system which incidentally allows the nonwovens to be pressed and even laminated against the plate.

After plasma activation chitosan could be grafted onto the surface of PP simply by dipping the fabric in a chitosan solution.

In what was really a second paper on a different subject, Dr Johansson described the use of an atomic force microscope to measure the frictional properties of polypropylene fibers with and without spin-finishes. Here a short length of one fiber was glued to the cantilever of the AFM and this was “scanned” across another single fiber. Plots of frictional response against load and distance were obtained. These showed that spin-finishes (alkyl polyether ethoxylates) tend to migrate to the crossover point of the two fibers, reduce the static friction by a factor of 3 and prevent viscoelastic deformation of the fibers.

Separation of Tencel fibres during airlaying


Dr Mohammad Osman , Researcher - Nonwovens Research Group, University of Leeds ( United Kingdom ) has used high speed photography to show that the main fiber-chip opening in an air-lay head (M&J-Type) occurs by collision of the rotor blades with chips on the screen. Effects of fiber morphology, pre-opening, fiber finish, fiber crimp and cutting methods have been studied but, maybe for commercial reasons, will not be reported for some time.

Calvin Woodings

26/4/2006

ENSAIT Founded in 1889, the ENSAIT trains 47% of French textile engineers to post-graduate level. Research at ENSAIT: The GEMTEX (Laboratory of engineering and textile materials) is a university laboratory. It is structured around two main research areas, namely processing and chemistry of materials and composites, (which include processing of textile materials and properties) and automation and textile logistics, (dealing with modelling, simulation and control of textile processes as well as supply chain management).

IFTH performs Applied Research and Development actions that are intended to make technology progress and to improve production techniques. The Institute is also responsible for the Bureau de Normalisation des Industries Textile-Habillement - BNITH (Textile-Apparel Industry Standardisation Office). It participates actively in several French, European and international standardisation commissions. Within the framework of training and consulting actions, IFTH provides tools in decision making to companies such as software and possibilities of interactive exchanges: technological watch clubs, thematic days, distribution of useful information, etc....

CENT is the European Centre for Nonwovens, which is dedicated to innovation in the nonwovens sector. The Centre offers well equipped, flexible facilities and laboratories, covering various technologies. It provides a wide range of scientific and technical capabilities covering different nonwovens areas and processes.

Friday, 28 April 2006

Edana 2006 Nonwovens Research Academy - Lille


The first EDANA Nonwoven Research Academy was the conference component of last year’s INDEX in Geneva . This second NRA was the first “stand-alone” meeting, the first to encourage student participation with a special registration fee of €25, and the first to feature EDANA grants to cover fees, travel and accommodation expenses for 11 selected MSc and PhD students of nonwovens.

Wolfgang Schilde and Barbara Schimanz of Germany's Saxon Textile Research Institute with Nigtao Mao of Leeds Nonwovens Research Group


Share of sales of products launched in the last 5 years versus R&D spend as a percent of sales from EDANA innovation management study 2005. The nonwovens industry achieves average innovation from below average expenditure.
Dr Elaheh Ghassemieh, Lecturer – Mechanical Engineering Department, University of Sheffield (United Kingdom) has measured the vibration damping properties of nonwovens by bonding them to a magnetically-excited cantilever beam in the ASTM E-756-98 standard test.











Edana sponsored students at the 2006 Nonwovens Research Academy conference in Lille.
Andrew Hewitt comments: "...the tall guy who is second from the left on the back row is me! - Andrew Hewitt. To the right of me is Elaine Durham (third from left on back row), and the guy wearing the v-necked jumper and blue T-shirt (third from the left on the middle row) is Baljeet Dhillon. We're all PhD students in the Nonwovens Research Group, Leeds University, UK. The guy third from the left on the front row is Saravanan Palaniappan, who was an Masters student with us at the time."
Can anyone else put more names to the faces - if so please use "comments" below.

Sunday, 25 December 2005

PIRA Biodegradables Conference 13-14/12/05


Key Points
• The UK government sponsored Waste Resources Action Programme is campaigning to reduce the use of disposable diapers and wants the producers of hygienic disposables to be responsible for disposal of the used products.
• WRAP is also against flushable products on the grounds that the UK taxpayer would pay for their treatment in sewage.
• Sustainability emerged as more important (environmentally speaking) than biodegradability.
• Development of sustainable or biodegradable or flushable products is still being hindered by unclear definitions of these words.
• Biodegradable plastics will need to be separated from conventional plastics destined for recycling.
• PLA appears to be making slow progress in developing applications outside food packaging.
• $ Sales of drug treatments for overactive bladder will exceed value of absorbent incontinence products by 2010.


Biodegradable = Sustainable?

Philip Ward, Director of the UK Government's Waste Resources Action Programme (WRAP), was concerned to respond to the EU Landfill directive and divert solids from the landfill route. The points he made were:

  • Recycling will not be enough. He is proposing the distribution of free home-composting bins to million of households, and then encouraging the disposal of any biodegradables through these bins.
  • He's working with the retail sector – the source of half the UK's landfilled waste – to design out the packaging waste (4.6 million tonnes/year), and the food waste (3.5 million tonnes/year)
  • Disposable nappies, at 300-400,000 tonnes (2-3% of domestic waste) are a problem and he is working to persuade consumers to move back to reusables.
  • This he saw as a battle between convenience and sustainability, and he felt that in the interests of the planet, everyone should be prepared to sacrifice a little convenience. He was hoping to reduce the 90-94% of diaper changes in the UK which now go to disposables.
  • Slow evolution of methane from biodegradables in a landfill was also a problem, methane being a much more potent greenhouse gas than carbon dioxide.
  • He used a balance sheet to illustrate the need to preserve global assets and not deplete them. The balance sheet was said to be P&G for 2004.
  • Providing consumer satisfaction without assessing long term sustainability leads to unforeseen consequences. Thomas Midgely's invention of Freon for fridges and tetra-ethyl lead for gasoline in the 20's led to environmental damage which will take 60 years to repair.
  • 1 tonne of consumer product requires 11 tonnes of Earth's resources.
  • We will need 5 new planets to get through the next century if China , India etc achieve the same living standards as USA .
  • WRAP is promoting Novamont Mater-bi for waste bin liners and carrier bags so that they can be composted in the home.
  • Biodegradation must be aerobic to avoid methane emissions.
  • Convenience products must not work by transferring some of their “system costs” elsewhere. (He feels that P&G and KC should now be paying for the costs of disposal of their diapers, because it is unfair to burden the UK taxpayer with this.)
  • He is anti-flushable products on the same grounds: the taxpayer would pay for any sewage treatment problems.
  • Biodegradables could contaminate the recycling stream and spoil the end products.
  • A universally recognisable biodegradable standard and mark is required.
  • He likes PLA packaging and thinks anything made from cornstarch must be good.
  • He regarded disposable nappies as a Genie, who escaped from the bottle before all the right questions had been asked.
  • He wished to emphasise his main message: “P&G and KC fail to take responsibility for their products – they leave it to the tax payer and this is no longer acceptable”
In response to questions - comments:

  • Methane was a valuable source of energy and could be collected from landfills and sewage, and even home anaerobic digesters on a larger scale than currently achieved. This was surely a better way of treating biodegradables than taking them straight to carbon dioxide with no energy recovery. He seemed to agree, and added that he would like to see all food manufacturers disposing of their food waste in on-site anaerobic digesters, and additionally retrieving food waste from the local community for similar conversion to energy and compost.
  • Diaper volume had been reduced by using more SAP. So the disposal benefit of “reduction at source” had been neutralised by moving from non-sustainable/biodegradable woodpulp to non-biodegradable non-sustainable fossil-fuelled SAP. (Statement from delegate)

European Tissue & Hygiene Trends

Irina Barbalova of Euromonitor UK said the population age shift in Western Europe was the key driver in this market, using a graph showing the median age rising from 39 in 2004 to 53 in 2020.

  • European tissue and hygiene product sales amounted to €24 billion in 2004, 25% of this being toilet tissue, 23% diapers/pants, and 17% femcare.
  • The next largest sector, wipes (10%) was the most dynamic growth area followed by incontinence products (3%).
  • Facial tissues (6%), kitchen towels (9%), and cotton-wool buds and pads (3%) made up the remainder of the market.
  • UK was the most penetrated region spending €71/capita on these products, with Russia bringing up the rear at €8/capita.
  • Eastern Europe was growing fastest (11% pa) but only amounted to 1/6 th the size of the WE market, which was growing at 2% p.a. In this region, diapers/pants had grown by 18% CAGR since 1998.
  • Russia , Poland and Hungary were the fastest growing diaper markets.
  • If diapers/pants were separated, pants became the fastest growing sector in the West (12% p.a.) due to the reluctance of busy parents to spend time on potty training.
  • Here, P&G's “Feel and Learn” and KC's “Pull-ups with Wetness Liner” helped the training process by providing a wetter topsheet.
  • Femcare was being repositioned as a beauty accessory: ultra slim, ultra comfort, invisible, and discreet being the keywords for products in modern and matchbox style packs.
  • SAP fibres contributed to the discretion of “Alldays”, while “Always Freshelle” combined pad and wipe in the same pack.
  • Wipes was a €2.3 billion market in 2004, €1.4 billion being personal wipes, the rest (in the hygiene category) being household. Sector growth was down to 7% for 2003-4.
  • KC's “Kleenex Anti-Viral” facial tissue claims to kill 99.9% of all viruses.
  • Attempts to improve profitability of toilet tissue will include reducing the number of sheets per roll, e.g. KC's “Andrex” down from 240 to 180. Moist toilet tissue is now growing rapidly.
  • For the 2004 to 2009 period, Ms Barbalova forecast the following CAGRs:
    • Wipes 4.5%
    • Incontinence products 7.0%
    • Diapers 3.5%
    • Femcare 3.0%
    • Toilet paper 1.8%
In response to questions she said all her growth rates were based on value: unit growth would be lower due to price increases. Euromonitor do not track biodegradable products, awareness of this attribute being in its infancy.

Non-Absorbent Hygiene Products

Helena Engquist (Consultant) acknowledged the ageing of Europe 's population and the resulting growth opportunities, but reminded us that the major pharmaceutical companies were developing life-style drugs to alleviate incontinence. Furthermore the “Seasonale” pill allowed women to reduce their periods to 4 a year with obvious potential to impact femcare sales.
• Drug companies are now advising sufferers to talk to their doctor about incontinence problems to see if a prescription drug would help.
• Novartis/P&G are collaborating to further develop the “Enablex” treatment for over-active bladder (FDA approved for prescription use in 2004) to allow an OTC version.
• Yamanouchi and GlaxoSmithKline to co-market Vesicare in the USA
• Takeda and Toray developing a novel OAB drug therapy in Japan
• $ sales of incontinence drugs will overtake $ sales of absorbents during 2009.


Biodegradable/Sustainable Fibres

Dr Richard Blackburn, Head of the Green Chemistry Group at Leeds University (UK) predicted demand for oil would exceed supply in 10 years, and landfill options for waste disposal would be running out. Biodegradable, or to be more accurate, sustainable polymers would be the solution to the resulting problems. Some biodegradable polymers (polycaprolactones) were made from oil, and these were not good. Some sustainable polymers made from sugar (“Sorona” from Dupont/Tate and Lyle) were not biodegradable but these were good. Cotton was not sustainable (too much oil-based fertiliser/pesticide needed), lyocell was better, but bast fibres (e.g flax, hemp, jute and ramie) will inherit the earth.

Biodegradable femcare/diapers

Marco Benedetti of the Wellness Innovation Project (W.I.P. – Italy ) described the problems of a small innovative company trying to compete against P&G/KC with new biodegradable products.

  • PLA fibers had been hard to get at the right specification.
  • No enthusiasm from the nonwovens industry for running trials with lyocell or PLA.
  • Trials were costly and the work needed to optimize nonwoven lines for these fibers was prohibitive.
  • Definitions were unclear in consumers minds. Flushability and biodegradability were regarded as equivalent and conveyed a similar message to compostable , natural and ecological .
WIP were using only biodegradable and hypoallergenic materials to make sanitary napkins and wet-wipes, and were now planning to introduce diapers and breast pads. The main fibers were PLA from Far Eastern Textiles, organic cotton and Lenzing lyocell. Mater-Bi™ from Novamont was the film used and Lysorb™ from Lysac was the SAP. Fama Jersey and Tenotex (BBA) hydroentangled the nonwovens, Polycart and Italpolimeri cast the films and FJWD, CIP4 and CELCOT did the packaging. (Lysorb™ worked well with blood but not with urine.)
The discussion involved more statements than questions:

  • P&G/KC are taking biodegradability seriously and have developments “on the shelf” awaiting profitable opportunities.
  • Mr Benedetti said he doesn't care about profits – he just wants to prove that progress in an important area can be made by a small company.
  • His competitor, “Nature Care” is not small. It's a global brand (£9million sales) and has better access to innovative materials, and gets better attention from nonwovens/film makers.
  • There are no problems processing PLA fiber. The high price of nonwovens is due to the high fiber cost.

Biodegradation: Waste disposal issues

Peter Jones of BIFFA Waste Services provided a view from the grave end of the disposable product lifecycle. Amid a wealth of data on the constituents of the UK 's solid waste stream a way forward emerged:

  • Producers of disposable products should be responsible for their ultimate disposal. BIFFA would bid for the collection and disposal contracts.
  • Hygiene product waste may not be suitable for composting because of the possible pathogen content. Incineration may be the only way.
  • The UK is already burning 160,000,000 tonnes/year of waste – said to be equivalent to putting 4 centuries of fossil carbon back into the atmosphere every year.
  • The UK plan to divert municipal organic matter from landfill to composting would reduce the landfill from 100% in 1995 to 35% in 2016.
  • Aerobic composting infrastructure required an investment of £50/tonne, whereas anaerobic treatment with energy recovery required £200/tonne.
  • Anaerobic treatment may prove the more cost effective in the long-run as energy prices increase.
  • The new BIFFA Wanlip waste-processing/recycling plant which started up in Leicester last year uses anaerobic digesters to treat the sludge and burns the resulting methane in gas-turbines to generate electricity.

Starch-based biodegradables

Frank Glatz of Plantic Technologies ( Netherlands ) described the development of a cornstarch “plastic” which costs the same as PVC, runs like PVC on injection moulding machinery and is now being used by Nestle to replace PVC in chocolate box trays. The development was based on an $18 million Australian investment which commenced 7 years ago.

  • The starch-plastic meets the EN 13432 compostability standard. In fact it dissolves in water.
  • It's being developed as a seed-wrap where it outperforms PVOH.
  • It meets the CEN TC 249 WI 249510 (draft) flushability test scheme for water dispersibility, solubility and biodegradability in waste water.
  • It is used in packaging for detergents, again said to better than PVOH

Asked what happened if it was accidentally splashed with water, Mr Glatz said it would dissolve. It would not be suitable for packing anything hygroscopic, but 80% of detergents were not hygroscopic, and anyway a waterproof coating on one side only would correct this. www.plantic.com.au (no written paper available)

Testing Biodegradability

Bruno de Wilde of Organic Waste Systems (OWS) Belgium is the official Belgian delegate on the ISO and CEN biodegradable plastics and packaging committees and is a member of DIN and ASTM.
Compostability needed evaluation in three parts: biodegradation, disintegration and compost quality. EN 13432 recommended the ISO 14855 test method along with 14851 and 14852 for biodegradation. Biodegradation was measured by CO 2 evolution over a composting period up to 6 months (45 days on the graphs). Disintegration was tested in pilot or (ideally) full-scale composting over 12 weeks when less than 10% of the original product should remain in a >2mm size fraction to be declared compostable. Compost quality was assessed against the physico-chemical standards (including limits on heavy metals) and by 2 plant growth tests. Additional toxicological tests involving daphnia and earthworms may be added in future.
Compost quality certification systems were now in place in Germany , Belgium , USA , Finland and Japan , each with its own logo, and one challenge for the future would be to distil these into a single global compostable certificate and logo. Other challenges would be covering biodegradation via liquid stream disposal (flushables), biodegradation by soil-burial (mulching products) and biodegradation in home composting.

Nappy Recycling

Paul Elder of Knowaste (UK) cancelled on the day he was due to speak, but his written paper observed that the UK generates a million tonnes of disposable nappy and incontinence pad waste each year, and 80% of this is now landfilled. Knowaste deals specifically with incontinence waste through its plants in Canada , Australia , Japan and Holland . It hopes to build a recycling plant in the UK and feels this is a competitive alternative to biodegradability, particularly if disposable nappies can be recycled also.

  • British people feel disposal of human waste in landfill is unhygienic, and worry about human waste leachate getting into ground water.
  • Recycling the materials from nappies conserves natural resources.
  • The Knowaste process produces plastic pellets for re-extrusion and paper pulp.
  • The superabsorbent enters the pulp stream and is deactivated chemically prior to the pulp being washed, cleaned screened and baled.
  • Urine and faeces are removed as sludge and could be tankered to anaerobic digesters on sewage farms for final treatment.
  • A plant to convert 50,000 tonnes/year of nappy waste into refined and dried product would cost £7m
  • The plastic pellets would be recycled into roofing, flooring and other non-critical goods.
  • The pulp would go into paper, cardboard and filter making.

PLA Update

Eamonn Tighe of Natureworks ( Ireland ) provided a comprehensive update under the heading “Sustainability in the Hygiene Sector”. Notable information was as follows:

  • Ingeo™ fiber-producing partners were listed as Accent, O'Mara, and FIT (USA), Antex and Radici (EU),Toray, Unitika, and Kuraray ( Japan ), and Far Eastern Textiles ( Taiwan ).
  • Spunbond/spunlace fabrics are available from Rieter Perfojet (presumably samples only).
  • The 2005 price for PLA on a 5000+ tonne contract is $1.4/kg, said to be the same as polyester (This was on a slide provided by Rieter/Perfojet)
  • On a slide labelled “Fossil Fuel Use” PLA polymer used 80 MJ/kg of which all but 26 was “renewable”. (Maybe the title should have been Energy Use.)
  • This 26 MJ/kg would be reduced to 16.6 by installation of windmills to power the Nebraska plant, planned for 2006.
  • The polymer production was CO 2 neutral (or negative in the case of the next generation products.)
  • Estimates of the environmental benefits were calculated on the basis of replacing 1000 tonnes of polyester (landfilled) with 1000 tonnes of PLA (composted).
    • 7900 barrels of oil saved
    • Or, 1.47 million litres of petrol
    • And 1147 tonnes of landfill waste avoided.
  • The first user in femcare was WIP ( Biodegradable femcare/diapers )
  • Healthquest were using it in a baby wipe.
  • Other applications in the EU for 2005 outside fashion apparel were fillings and waddings, blankets and draperies. (“ Europe has lead in product innovation and downstream market development”)
  • The main applications are clearly in packaging.

Starch-Based Films

Stefanco Facco of Novamont ( Italy ) described the benefits of the Mater-Bi™ polymer. Destructured GMO-free cornstarch and chemical modifiers were converted into amorphous amylase and amylopectin, which was then reacted with polymeric complexing agents to form the Mater-Bi™ complexed starch. 35,000 tonnes/year were produced at the Terni plant in Italy . This comprised 60% annually renewable material which would degrade to CO 2 . It was non-toxic and compostable according to EN 13432 where it degraded faster than pure cellulose.
The polymer could be processed at above 80% of the efficiency of polyethylene and the resulting film was microporous having a permeability of 500-1000 g/m 2 /24 hours c.f. 15 for the same thickness of PE. In addition to a wide range of packaging applications, the film had been developed for hygiene product backsheets and apertured topsheets. It could be extrusion coated onto nonwovens.

SAP Update

Edgar Herrmann of Hy-Tec Hygiene Technology GmbH ( Germany ) commented on the current shortage of SAP arising from high demand ( China effect) and the diversion of acrylic acid into more profitable paints and coatings.

  • Of the 1264 kt SAP (2005) capacity,
    • 453 kt was used in the Far East
    • 445 kt in the USA
    • 366 kt in Europe
  • BASF was the largest producer with 305 kt, followed by Degussa (276 kt), Nippon Shokubai (230 kt) and Dow (150 kt)
  • New developments in SAP were listed as:
    • Fibers, but these are costly and have low retention under pressure.
    • Reducing gel-blocking – clay/SAP combinations or shell crosslinking with polyol/aluminimsulphates
    • Incorporation of odor control – silver, plant extracts, or cyclodextrine additions,
    • Improving saline absorbency – by incorporation of ion-exchange polymers
    • Manufacture from renewable resources – polycarboxy-polysaccharides, lignin grafting, Starch, CMC or guar gum.
    • Controlled release of pharmaceuticals and pesticides.

Cellulose-based packaging films

Andy Sweetman of Innovia Films (UK) described Natureflex™ and the process for making it without mentioning Cellophane, or the origins of Innovia in Courtaulds. He described the process for making this “transparent paper” out of wood-pulp using the viscose process and the various means of coating it to achieve heat-sealability or to modify its water sensitivity.
Coating developments were enabling it to enter some new markets:

  • The NE 30 White grade used matt viscose to make a white cellophane and this was coated with barrier sealants on both sides. This reduced moisture permeability compared with the semi-permeable sealed NE 600 film from 600 to 30 (units not given). It nevertheless remained fully biodegradable and flushable – as evidenced by its use to wrap digital tampons.
  • 23 micron E947M, a metallised high barrier cellophane, achieved OPP levels of barrier performance and was being tested in twist-wrap.
  • 45 micron E946 had an ultrareceptive coating for use in labels.

Protein-based hydrogels

Dr Srinivasan Damodaran of the University of Wisconsin ( Madison – USA ) suggested that protein sources could be used to make hydrogels via the following process:

  • Denature the protein at pH 11.5 and 60 o C for 30 mins.
  • React with ethylenediamine tetracetic anhydride at a weight ratio of 1:8 (converts it to an anionic polymer).
  • Concentrate to 15% by ultrafiltration.
  • Cross-link, e.g. with glutaraldehyde.
  • Dehydrate with ethanol and air-dry.
  • Size to give 300-600 mm (sic) particles.
Possible protein sources included fish biomass, oilseeds, and slaughterhouse waste.
Water uptake over 24 hours ranged from 150-300 g/g. Saline uptake reached 26 g/g after 1 hour. The hydrogels were able to bind the heavy metals mercury (1 mmol/gm), lead (0.75 mmol/gm) and zinc (0.65 mmol/gm). Soy protein hydrogel had a centrifuge retention capacity of 13 g/g which could be increased to 20 g/g by addition of 5% of CMC hydrogel.
Calvin Woodings
4/1/2006